Countax Ignition Switches
Countax ignition switches control electrical circuits enabling engine starting and shutdown on ride-on and zero-turn equipment. Our ignition switch inventory includes Countax mower ignition switches, starter ignition switches, key switches, and replacement ignition switches for TimeCutter, Z Master, and commercial Countax models. Countax Spares stocks Countax ignition switch assemblies in stock with correct terminal configurations for all major model series, providing worldwide shipping on all ignition switch orders. These essential key switch components route battery power through safety interlocks to starter solenoids and fuel shut-off solenoids whilst providing convenient operator control of mower electrical systems.
Available Countax Ignition Switches
1987 To 2005 Ignition Switch
T-44812900
Countax
£45.40
In Stock
Ignition Switch and Keys
T-448010700
Countax
£96.46
In Stock
Ignition Switch
T-449880300
Countax
£53.62
In Stock
Ignition Switch
T-448017800
Countax
£49.92
In Stock
Ignition Switch/Keys and Loom
449882800
Countax
£15.23
Available
Ignition Switch Steel Lock Nut M16
T-048001300
Countax
£8.32
View More
Ignition Switch and Keys
T-449683300
Countax
£28.06
View More
Seat Switch
T-44887900
Countax
£69.50
In Stock
Brake Switch
T-44945001
Countax
£33.80
In Stock
Pull Safety Switch
T-44813400
Countax
£33.88
In Stock
Deck Height Switch P.C.Board
T-449561501
Countax
£271.39
In Stock
Switch Pto (6204-341)
T-449880100
Countax
£17.44
In Stock
Frequently Asked Questions
How do I test a Countax ignition switch?
Test ignition switches using a multimeter set to continuity mode, checking that circuits close between proper terminals in each key position (off, run, start). Replace switches showing no continuity or incorrect terminal connections.
Why won't my Countax start even with the key turned?
Non-starting with key turned indicates faulty ignition switch contacts, corroded switch terminals, or disconnected wiring harness behind the switch. Check for 12V at switch output terminals when key is in start position.
Can I bypass a Countax ignition switch?
Bypassing ignition switches removes critical safety interlocks and isn't recommended; however, temporary jumper wires between switch terminals can diagnose switch failures. Replace faulty switches rather than permanently bypassing safety systems.
What causes Countax ignition switches to fail?
Ignition switch failures result from corrosion on brass contacts, worn internal components from repeated cycling, moisture penetration into switch housing, or loose mounting allowing excessive vibration. Plastic switches are particularly prone to contact wear.
Do Countax ignition switches include safety circuits?
Yes, Countax ignition switches integrate with safety interlock systems preventing starting unless seat, brake, and PTO switches show proper positions. Faulty ignition switches can prevent starting even when all safety switches function correctly.