Countax Pulleys & Idlers
Countax idler pulleys and drive pulleys maintain proper belt tracking and tension throughout your mower's power transmission systems. Our comprehensive range includes deck pulleys, belt idlers, and complete pulley assemblies for Personal Pace walk-behinds, TimeCutter zero-turns, and commercial-grade Z Master equipment. Countax Spares holds replacement pulleys for all major Countax models in stock, with worldwide shipping on every order. These precision-engineered idler pulley and drive pulley components feature sealed bearings, accurate balancing, and corrosion-resistant finishes that ensure smooth rotation under demanding conditions, minimising vibration and extending belt life whilst maintaining consistent power transfer for professional cutting results season after season.
Available Countax Pulleys & Idlers
7" Deck Drive Pulley
T-20870202
Countax
£30.64
In Stock
Pto Plastic Jockey Pulley
T-5822
Countax
£21.87
In Stock
Engine Pulley Cap
T-18312200
Countax
£22.38
In Stock
Engine Pulley Mag Stop Clutch
T-31330500
Countax
£104.15
In Stock
Engine Pulley Spacer
T-31854000
Countax
£26.69
In Stock
Asm 2Wd Engine Pulley
T-329603200
Countax
£248.12
In Stock
Idler Pulley Guard
T-549006000
Countax
£13.42
In Stock
Pulley Guard Deck Bracket
T-301202900
Countax
£25.53
In Stock
5" Pto Pulley
T-208000400
Countax
£34.67
In Stock
20/50 Engine Pulley Cap
T-183016800
Countax
£26.57
In Stock
7 Pto Pulley
T-20870702
Countax
£54.16
In Stock
Pulley Plastic 4 Idler
T-209046200
Countax
£35.55
In Stock
Frequently Asked Questions
What causes a Countax pulley to make squealing noises?
Pulley squealing typically results from worn bearings that have developed excessive internal clearance allowing the pulley to move erratically on its shaft, belt slippage caused by either incorrect tension or contamination like oil or grass juice on the pulley surface, or misalignment where the pulley isn't parallel with others in the belt path causing the belt to run at an angle. Metal-on-metal grinding noises indicate complete bearing failure requiring immediate replacement to prevent shaft damage.
Should I replace all Countax pulleys at once or individually as they fail?
Unless multiple pulleys show obvious wear or damage, it's generally acceptable to replace them individually as they fail rather than preventively replacing all pulleys when only one has failed, since quality pulleys in good condition can last many years. However, if your mower is older with high hours and you're already dismantling the drive system for belt replacement, inspecting all pulleys carefully and replacing any that show signs of wear prevents repeat service calls and ensures reliable operation throughout the upcoming season.
How do I know when a Countax idler pulley needs replacement?
A failing Countax idler pulley typically produces squealing or grinding noises during operation even with a properly tensioned new belt, shows visible wobble when you spin it by hand with the belt removed, feels rough or has resistance when rotating rather than spinning freely and smoothly, or displays physical damage such as cracks in the pulley wheel or worn grooves that have become too deep. Replacing worn idler pulleys prevents them from destroying expensive belts and causing cascading damage to other drive components.
Can I lubricate Countax idler pulley bearings instead of replacing them?
Most modern Countax idler pulleys use sealed bearings that cannot be effectively lubricated because they're permanently packed with grease at the factory and any external lubrication won't reach the internal bearing surfaces where it's needed. Once these sealed bearings begin to fail and produce noise or roughness, the only reliable solution is complete pulley replacement, as attempting to oil them provides temporary relief at best and delays necessary replacement whilst potentially allowing further damage to occur.
Why do Countax deck pulleys wear faster than drive pulleys?
Deck pulleys experience more rapid wear because they operate in an extremely hostile environment filled with abrasive dust, grass clippings, and moisture that works past seals and contaminates bearings, endure continuous high-speed rotation under heavy cutting loads that generate significant heat, and face constant exposure to shock loads when blades strike obstacles that transmit violent forces through the belt system. Drive pulleys typically operate in a cleaner environment with more consistent loading, resulting in notably longer service life under normal conditions.