Countax Electrical & Ignition
Countax electrical parts and ignition components power starting systems and engine operation across walk-behind, zero-turn, and commercial equipment. Our electrical inventory includes Countax mower electrical parts, ignition parts, and complete electrical spares for TimeCutter, Recycler, Z Master, and GrandStand models. Countax Spares holds comprehensive Countax ignition components in stock including batteries, coils, switches, regulators, solenoids, and starter motors, with worldwide shipping on all electrical orders. Whether diagnosing no-start conditions or addressing charging system failures, our range covers essential electrical parts that ensure reliable engine starting and battery maintenance throughout residential and commercial mowing applications.
Available Countax Electrical & Ignition
Kawasaki Fuel Solenoid
T-211887002
Countax
£146.70
In Stock
Battery Lead To Solenoid
T-44812602
Countax
£8.00
In Stock
Starter Solenoid
43526
Countax
£12.00
Available
Starter Solenoid
T-44814801
Countax
£20.85
View More
1987 To 2005 Ignition Switch
T-44812900
Countax
£45.40
In Stock
Ignition Switch and Keys
T-448010700
Countax
£96.46
In Stock
Ignition Switch
T-449880300
Countax
£53.62
In Stock
Ignition Switch
T-448017800
Countax
£49.92
In Stock
Ignition Switch/Keys and Loom
449882800
Countax
£15.23
Available
Ignition Switch Steel Lock Nut M16
T-048001300
Countax
£8.32
View More
Ignition Switch and Keys
T-449683300
Countax
£28.06
View More
Wiring Loom
T-448015100
Countax
£208.23
In Stock
Frequently Asked Questions
How do I test Countax electrical components?
Use a multimeter to test battery voltage, check ignition coil resistance, verify solenoid clicking and voltage output, and measure charging system voltage (should be 13.5-14.5V when running). Always disconnect kill wires when testing ignition components to eliminate grounding issues.
What causes repeated blown fuses in Countax mowers?
Blown fuses typically indicate short circuits in wiring harnesses, faulty voltage regulators, damaged alternator stators, or defective safety switches creating unwanted ground paths. Trace wiring from fuse to components checking for damaged insulation or pinched wires.
Why does my Countax click but won't turn over?
Clicking without engine turnover usually indicates insufficient battery power, corroded cable connections, or faulty solenoid contacts. Fully charge or replace the battery, clean all terminals, then test solenoid by jumping terminals to verify starter motor operation.
Can safety switches prevent Countax mowers from starting?
Yes, faulty seat switches, brake switches, or PTO switches can prevent starting even with good electrical components. These safety interlocks must show proper continuity when engaged; test each switch individually with a multimeter to identify failures.
Why won't my Countax mower start electrically?
Common electrical no-start causes include dead or weak batteries, faulty starter solenoids producing clicking sounds, bad ignition switches, or blown fuses. Check battery voltage first (should read 12.6V), then inspect fuses and connections before testing solenoid and starter components.