Countax Anti-Scalp Wheels
Countax anti scalp wheels prevent deck contact with ground surfaces during uneven terrain navigation, protecting turf from scalping damage. Our anti scalp wheel inventory includes deck anti scalp wheels, mower deck wheels, and anti scalp rollers for TimeCutter, Z Master, and GrandStand models. Countax Spares stocks Countax deck protection wheels with mounting hardware for zero-turn and walk-behind applications, providing worldwide shipping on all anti-scalp wheel orders. These essential deck protection components feature durable polymer construction and sealed bearings that withstand continuous ground contact whilst maintaining proper deck float over terrain variations.
Available Countax Anti-Scalp Wheels
Anti Scalp Wheel
T-149495800
Countax
£19.35
In Stock
Anti Scalp Wheel
T-19905500
Countax
£18.38
In Stock
Anti Scalp Wheel Bolt 5/16 X 3.1/2" Unf
T-01854700
Countax
£0.90
In Stock
Anti Scalp Wheel
T-7320
Countax
£8.01
In Stock
Anti Scalp Wheel
T-19808800
Countax
£12.92
Available
50" Deck Centre Scalp Wheel Flat Plate
T-307022700
Countax
£13.70
In Stock
Frequently Asked Questions
How should Countax anti-scalp wheels be adjusted?
Set Countax anti-scalp wheels approximately 1/4 to 1/2 inch above flat ground when the deck is at your normal cutting height. Wheels should only contact ground during terrain dips or high spots, not roll continuously which causes rapid wear.
Why do my anti-scalp wheels wear out quickly?
Rapid anti-scalp wheel wear indicates they're adjusted too low causing constant ground contact rather than occasional terrain protection. Raise wheels to prevent continuous rolling whilst still providing deck support over uneven areas.
Can I remove anti-scalp wheels if they mark my lawn?
Removing anti-scalp wheels eliminates protection against deck gouging on uneven terrain and isn't recommended. Instead, adjust wheels higher to reduce lawn marking whilst maintaining protection against scalping when crossing dips or rises.
Do all Countax decks have anti-scalp wheels?
Larger Countax zero-turn decks typically include multiple anti-scalp wheels as standard equipment, whilst smaller walk-behind decks may offer them as optional accessories. Check your model's specifications to determine factory configuration.
What's the difference between anti-scalp wheels and deck wheels?
Anti-scalp wheels are specifically positioned to prevent deck-to-ground contact on uneven terrain, whilst gauge or deck wheels support the deck and help determine cutting height. Some Countax models use both types for optimal performance.