Countax Belt Tensioners
Countax belt tensioner assemblies maintain proper belt tension across your mower's drive system, ensuring smooth power transmission and preventing belt slippage during operation. Our range includes tensioner pulleys, complete belt tensioner assemblies, and idler tensioner springs for Personal Pace, TimeCutter, and commercial Countax mowers. Countax Spares holds mower tensioner components in stock for both walk-behind and zero-turn models, with worldwide shipping on all belt tensioner parts. These critical components feature robust springs and precisely manufactured pulleys that automatically adjust tension as belts wear, extending belt life and maintaining consistent performance throughout the operating season for professional landscapers and homeowners alike.
Available Countax Belt Tensioners
Hgm Deck Tensioner
T-329651100
Countax
£35.08
In Stock
Belt Tension Spring
T-25849600
Countax
£9.99
In Stock
Deck Tension Spring
T-25906200
Countax
£15.66
In Stock
Rider Transmission Drive Belt
T-22905300
Countax
£22.58
In Stock
B47 42" Hgm Deck Drive Belt
T-22951600
Countax
£41.82
In Stock
Pto Drive Belt
T-22951900
Countax
£41.89
In Stock
A40 Belt
T-22950600
Countax
£26.58
In Stock
Engine To Cutter Deck Belt B61
T-22950500
Countax
£39.25
In Stock
Engine To Cutter Deck Belt
T-229503900
Countax
£38.78
In Stock
Engine To Cutter Deck Belt
T-22871200
Countax
£30.73
In Stock
SPZ762 PGC Internal Side Drive Belt
T-22879900
Countax
£22.48
In Stock
Transmission and Spreader Belt
T-228001000
Countax
£42.28
In Stock
Frequently Asked Questions
What are the symptoms of a failing Countax belt tensioner?
A failing Countax belt tensioner typically produces a rattling or vibrating sound from the drive area especially when first engaging the blades or self-propel system, causes belts to squeal under load even when relatively new, or results in belts repeatedly slipping off pulleys despite correct installation. You may also notice that the tensioner spring appears stretched or weak, the tensioner arm moves excessively during operation, or there's visible wear on the tensioner pulley bearing causing it to wobble rather than spinning smoothly.
How often should Countax tensioner springs be replaced?
Countax tensioner springs should be inspected annually and typically require replacement every three to five years as they gradually lose their tension over time due to constant compression and expansion during mower operation. Commercial users or those operating equipment in dusty conditions may need more frequent replacement, particularly if you notice that new belts don't maintain proper tension or if the tensioner arm doesn't snap back firmly when the PTO is disengaged.
Can I adjust my Countax belt tensioner instead of replacing it?
Many Countax models feature adjustable tensioner systems where you can fine-tune belt tension by repositioning cable clamps or adjusting spring compression, which is particularly useful after installing a new belt that may seat differently than a worn one. However, if the tensioner pulley bearing is worn or the spring has permanently lost its elasticity, adjustment alone won't solve the problem and component replacement becomes necessary to restore proper function and prevent recurring belt issues.
Why does my Countax tensioner pulley shake excessively?
Excessive shaking in a Countax tensioner pulley usually indicates worn bushings or bearings within the tensioner arm assembly, which allows too much play and causes the pulley to move erratically rather than maintaining steady contact with the belt. This condition can quickly destroy belts through irregular wear patterns and should be addressed promptly by inspecting the tensioner arm pivot points, replacing worn bushings, and ensuring all mounting bolts are properly tightened to specification.
What's the correct tensioner spring position for my Countax?
The correct tensioner spring position varies by Countax model, but generally the spring should connect the tensioner arm to a fixed mounting point on the deck or frame in a way that pulls the tensioner pulley firmly against the belt when engaged. Consult your model's parts diagram to verify proper spring orientation, as incorrect spring placement can result in either insufficient tension that allows belt slippage or excessive tension that causes premature bearing wear and makes belt installation unnecessarily difficult.