Countax Blade Bolts & Washers
Countax blade bolts and washers secure cutting blades safely to spindle assemblies, providing reliable fastening that withstands extreme rotational forces during operation. Our inventory covers blade bolt and washer sets, mower blade bolts, blade fixing kits, and blade mounting bolts for all Countax model series including walk-behind, zero-turn, and commercial equipment. Countax Spares holds Countax blade bolt assemblies in stock with proper grade specifications and torque requirements, offering worldwide shipping on all blade mounting hardware. These critical fastening components feature correct thread pitch, head dimensions, and hardness ratings that prevent loosening under vibration whilst allowing proper torque application for secure blade retention without damaging spindle threads or crushing adapter components.
Available Countax Blade Bolts & Washers
48" Ibs Cutting Deck Blade Kit
T-40505500
Countax
£78.58
In Stock
Genuine Hgm L/H Or R/H Angled Blade
T-16000300
Countax
£19.49
In Stock
15 R/H Hgm Blade
T-16000400
Countax
£20.43
In Stock
R/H 15" Cutting Blade
T-16869202
Countax
£18.04
In Stock
Genuine Hgm L/H Or R/H 15" Flat Blade
T-16000500
Countax
£20.43
In Stock
Combi and Mulching 30" Blade
T-169381100
Countax
£55.56
In Stock
Genuine Hgm 12" R/H / Centre Angled Blade
T-16000100
Countax
£19.83
In Stock
Combi and Mulching 17" Blade
T-169381200
Countax
£24.28
In Stock
R/H 17.5" Cutting Blade
T-16929000
Countax
£25.47
In Stock
Combi and Mulching 15" Blade
T-16937900
Countax
£23.06
In Stock
Combi and Mulching 19" Blade
T-16938100
Countax
£27.05
In Stock
L/H / Centre 17.5" Cutting Blade
T-16928900
Countax
£35.80
In Stock
Frequently Asked Questions
Can I reuse old Countax blade bolts when installing new blades?
Reusing Countax blade bolts is acceptable for one or two blade changes provided the bolt head shows no rounding or stripping, the threads are clean and undamaged, and the bolt hasn't been over-torqued previously causing thread stretch that reduces clamping force. However, many professionals replace blade bolts with every blade change as insurance against failure since bolts are inexpensive compared to potential damage from a blade coming loose during operation, and bolts that have been torqued multiple times gradually lose their elastic properties making it impossible to achieve specified clamping force even at proper torque settings.
What's the correct order for washers when installing Countax blades?
The correct Countax blade assembly order from bottom to top is spindle shaft, blade adapter, blade with cutting edges facing down and wings pointing up toward the deck, special cupped washer with cup facing toward the blade, then the blade bolt threaded into the spindle, though some models include additional flat washers or blade stiffeners that must be positioned according to parts diagrams. The cupped washer is particularly important because its design provides spring tension that helps maintain bolt tightness whilst allowing slight blade deflection when striking objects, and installing it backwards or omitting it entirely can lead to rapid bolt loosening and dangerous blade ejection.
Why won't my Countax blade bolt come loose?
Seized Countax blade bolts result from corrosion between the bolt threads and spindle threads especially after exposure to moisture and grass chemicals, over-tightening that has effectively welded threads together through friction heat, or thread-locking compound that has cured beyond normal strength due to age. Apply penetrating oil and allow several hours for it to work into the threads, use a breaker bar rather than a standard ratchet to generate higher torque for initial loosening, and consider using heat from a propane torch on the spindle housing to expand the threads before attempting removal, though be extremely careful not to damage surrounding components.
What torque specification should I use for Countax blade bolts?
Countax blade bolt torque specifications vary by model with walk-behind mowers typically requiring 60 foot-pounds whilst zero-turn mowers generally need 35 to 65 foot-pounds depending on deck size and blade weight, making it essential to consult your owner's manual for exact specifications rather than guessing. Under-torquing blade bolts creates dangerous conditions where blades can loosen during operation potentially causing ejection and serious injury, whilst over-torquing damages spindle threads or stretches bolts beyond their elastic limit causing premature failure, so proper torque wrench use is not optional but rather a critical safety requirement.
Are Countax blade bolts reverse thread or normal thread?
Countax blade bolts use standard right-hand threads that loosen counter-clockwise and tighten clockwise, exactly like typical nuts and bolts found throughout your mower and in everyday applications. The misconception about reverse threads likely comes from confusion with older mower designs from different manufacturers that occasionally used left-hand threads to prevent loosening from blade rotation, but Countax has consistently relied on proper torque settings and thread-locking compounds rather than reverse threading to secure blades safely.